Photo is for reference only. Color, veining, and shading vary between slabs. This stone is brought in per order, so tell us your full run and we will source slabs from the same block.

Carrara White

Quarry: Italy
Surface Finish: Polished
Edges: Natural (Unpolished)
Thickness: 18 mm
Requires Sealing: Yes

Sunday dough rolled out on the island while lunch cooks behind you. Carrara White Marble feels cool the moment you touch it, and its gray veining feathers at the edges instead of cutting a hard line.

Quarry	Italy
Surface Finish	Polished
Edges	Natural (Unpolished)
Thickness	18 mm
Requires Sealing	Yes

Get a FREE Quote Today!See Other Marbles

Indent order: brought in for your project rather than held in the yard. Ask your branch about the current lead time.

Get a Quote

Why Choose Carrara White

No Two Slabs Alike Veining is geological rather than printed, so your Cebu counter carries a pattern nobody else has.

Timeless Appeal Quarried above Carrara for more than two thousand years and still the reference point for white stone.

Naturally Cool Marble feels cool under the hand because it draws heat away quickly, which is why pastry chefs have always worked on it.

Increases Your Home’s Resale Value Buyers register real stone. Marble reads as a permanent upgrade rather than a surface treatment, so it pays you back again on the day you sell a Cebu property.

What Is Carrara White Marble?

The Italian white that every other white gets measured against.

Carrara is a marble running from white to pale gray, quarried in Tuscany and threaded with soft gray veins whose edges feather out instead of stopping at a hard line. More of it has been used than of any other marble on earth, which is why veined white stone is the picture that arrives when somebody says the word marble.

Set against Calacatta, the field here reads cooler and grayer while the veins run finer and turn up more often. Calacatta hands you a few dramatic strokes on brilliant white. Carrara keeps the movement going gently from one end of the slab to the other.

Abundance is the other separator. These mountains give up Carrara in quantity where Statuario and Arabescato come out sparingly, and rarity rather than performance is what moves a marble figure.

Michelangelo cut the David out of a Carrara block. Those quarries above the town have been worked for upwards of two thousand years and have not stopped, which is a track record no manufactured surface is in a position to claim.

How Much Does a Carrara Marble Countertop Cost in Cebu?

Prices are subject to change without prior notice.

Item	Starting Rates
Carrara White slab	Quoted per project
Fabrication	₱500 per lm
Installation	₱500 per lm
Sink or hob cut-outs	₱500 per set

Cut-out charges apply only when installation is included. Delivery is priced by distance from our Cebu branch, whether the slabs travel across Metro Cebu or ship out to Bohol.

Get a FREE Quote Today!

How Do You Clean Carrara Marble?

Three habits, and a soft stone stays presentable in a Cebu home for years.

Keep It Away from Acidic Substances

Calamansi, vinegar, wine and tomato work on the polish in minutes rather than hours. Acid dissolves calcium carbonate and marble is calcium carbonate, so speed counts for more on this counter than on any other material in the kitchen.

Use Only Marble-Safe Cleaner

Vinegar sprays and the usual all-purpose bottles are acidic in themselves and will etch the surface unaided. Anything formulated for marble takes grease off and leaves the polish where it is.

Blot Spills and Drips Promptly

Run a cloth sideways and the spill ends up covering more porous stone than it started on. Press a folded cloth down instead, and the liquid comes up vertically while the wet patch stays where it was.

Our Cebu yard carries specially-formulated stone care products, which beats standing in a supermarket aisle reading labels.

How Do You Care for Carrara Marble?

Protection first, because repair is the expensive route.

Reseal as Needed

Use ages a sealer; the calendar does not. Leave a few drops of water on an inconspicuous part of the counter for 15 minutes, wipe them off, and a darkened patch underneath says another coat is due.

Always Use Coasters and Trays

Marble registers 3 on the Mohs scale, which puts it beneath the glazed foot of a mug. Coasters beneath glasses and a tray beneath bottles keep rings and chipped edges from ever starting.

Always Use a Cutting Board

Steel beats marble every time, so a knife run over the bare counter strips polish and comes away blunter than it went on. A single board rescues both.

Is Carrara Marble Good for Kitchen Countertops?

Only where etching is accepted as part of the deal.

Yes, and several million kitchens are the evidence. The claim we will not make is that marble handles like granite, because it plainly does not.

Etching is the difficulty here, not staining. One drop of calamansi takes a microscopic layer of polish away with it and leaves a flat mark, and no sealer sold anywhere prevents that. Absorption is what sealer slows; it puts nothing between acid and stone.

Three routes are honest. Honed, and the marks barely announce themselves. Polished, on the understanding that the sheen goes uneven across the years, which owners who love marble file under patina and owners expecting it to stay factory-new file under damage, so working out which camp you are in now saves a difficult conversation later. Or a marble-look engineered quartz, Lightning Calacatta or Cirrus Calacatta, which cannot etch at all.

There are rooms where Carrara gives you no trouble whatever. Vanities, splashbacks, feature walls and fireplace surrounds meet neither acid nor knives, and marble put in those positions in a Cebu home stays as it was on the day it went in.

Does Carrara Marble Need Sealing?

Sealing stops stains. Nothing stops etching.

Yes. Pores run right through marble, which is how oil and pigment get down inside a slab instead of sitting on top waiting to be wiped away. An impregnating sealer fills that network and buys you the minutes between a spill landing and a spill turning into a mark.

Read the slab rather than the calendar. Leave a few drops of water on an inconspicuous part of the counter for 15 minutes, wipe them off, and darker stone where the water sat tells you it is drinking and wants a coat.

Six months is roughly as often as a hard-working Cebu kitchen counter asks. A vanity stretches a good deal further. The job itself runs about 15 minutes: clean, dry thoroughly, apply, let it dwell, then buff the excess away before it hazes over.

Be clear about the boundary. Etching still happens on a sealed slab, because the acid is attacking the stone itself rather than soaking down into it.

Carrara vs Calacatta, Statuario and Quartz

Four white surfaces on our Cebu list, four different bargains.

Carrara is the everyday Italian white

Cooler, grayer, and finely veined from edge to edge. Pick it where real marble matters to you and a softer, busier pattern is no obstacle.

Statuario is the scarcest

Statuario puts bolder, more separated gray veins on a brighter white, and it sits above Carrara in our Cebu range. Rarity opens that gap, not performance, since the two stones behave identically.

Arabescato is the boldest

Arabescato sweeps heavy gray banding across the slab and reads more like a feature wall than a worktop. Pick it where the stone is meant to be the subject.

Engineered quartz removes the risk

Lightning Calacatta and Cirrus Calacatta land the look at ₱8,000 per sqm in Cebu, with nothing to seal and nothing to etch. Depth and irregularity are the part only a quarry supplies.

What Colors Go With Carrara Marble?

A cool gray-white, which rules some Cebu pairings out.

There is a real gray cast in this ground rather than a warm one, so cool palettes settle beside it far more easily than warm palettes do. Pale gray, soft blue and crisp white cabinetry all read cleanly against it.

Timber is workable in a Cebu kitchen but wants thought. Reach for a cooler oak or an ash rather than anything red-toned, since a warm wood ends up fighting the gray in the slab.

Polished chrome and brushed nickel are the natural hardware here. Brass looks handsome and drags the whole scheme warm, so if you go that way, carry it through the room rather than dropping it in as an accent.

Deep navy under an island is a strong pairing in a Cebu kitchen. The counter reads bright above it and the fine veining still registers, where a heavier stone would swallow the effect.

Frequently Asked Questions

What is the difference between Carrara and Calacatta marble?

Carrara runs a cooler gray-white ground with fine, frequent veining, while Calacatta runs a brighter white with fewer, bolder veins. Both are quarried in the same region of Tuscany and neither performs better than the other in a kitchen. What separates them is appearance.

Does sealing prevent Carrara marble from etching?

No. Sealing shuts down absorption, which is how it defeats stains. Etching is acid reacting with the calcium carbonate in the slab, and that reaction runs on the face of the stone whether or not sealer sits in the pores. It is the single most common misunderstanding about marble.

Can you remove etch marks from Carrara marble?

Light ones, yes. Polishing powder made for marble will often buff a shallow etch out of a polished face. Anything deeper is a job for a fabricator with honing and re-polishing kit. On a honed surface the marks stay so faint that most owners never trouble with them.

Is Carrara marble suitable for bathrooms?

Yes, and this is the room where it performs best. A Cebu vanity deals in water, soap and toothpaste rather than calamansi and hot pans, so the slab keeps looking much as it did on installation day. Seal it on the same as-needed basis you would a counter, and dry standing water off so mineral rings never get started.

Will Carrara marble stain?

Yes, if unsealed. Oil is the worst of it, travelling into the stone and leaving a dark patch that resists lifting. Kept sealed and wiped promptly, a stain is a rare event. Where one does appear, a poultice of baking soda and water drawn over the mark will often pull it back out.

Is Carrara marble cheaper than quartz in Cebu?

Ask us for a current figure. The Calacatta-look quartz designs are ₱8,000 per sqm here, with Royal Calacatta at ₱9,000, but Carrara comes in on indent and gets quoted against your project, so there is no shelf price to set beside them. Behaviour is the more useful comparison anyway: quartz does not etch, resists staining and never wants sealing.

Can Carrara marble be used for flooring?

Yes, and it has been for centuries. Specify honed rather than polished for a Cebu floor, since a polished floor turns slippery underwater and shows every scratch that grit underfoot puts into it. Keep it away from an entryway, where sand and rain arrive together.

Where can you buy Carrara marble in Cebu?

Stone Depot. Every branch handles Carrara White as an indent order, which means the slab is brought in against your project instead of waiting in our Cebu yard, and there is no standing stock here to walk through. Ask us for the current lead time when you enquire.

Blocks differ, and so does their veining, so give us the whole run at the order stage and we will source slabs cut from one block. Cebu clients also ship this stone to Bohol, Leyte and Negros through us, and the Cebu branch is open Monday to Saturday, 8 AM to 5 PM. Reach us on Facebook or at email@stonedepot.com.

Send Your Plan and Get an Estimate Within 24 Hours

Free and no obligation. Or drop by any of our branches and we will provide you a quotation on the spot.