Aetherstorm

Photo is for reference only. Color, veining, and shading vary between slabs. Visit our slabyard to select your material in person.

Aetherstorm

₱8,000 per sqm

Quarry: China
Surface Finish: Polished
Edges: Natural (Unpolished)
Thickness: 18 mm
Requires Sealing: No

Wine and oil come off the counter at the end of the night without a fight. Aetherstorm is a fine gray drift across warm off-white at ₱8,000 per sqm in Cebu, and the pattern repeats, so a long run reads as one surface.

QuarryChina
Surface FinishPolished
EdgesNatural (Unpolished)
Thickness18 mm
Requires SealingNo
Get a FREE Quote Today!See Other Quartz Designs

Available at all 5 branches. Custom-fabricated and installed in 3-5 days.

Get a Quote

Why Choose Aetherstorm

Stain-Resistant Manufactured rather than quarried, so acid will not etch it and no sealer is ever required.
Quiet, Soft Veining A fine gray drift on warm white that gives a Cebu kitchen movement without making the counter the loudest thing in it.
Consistent Appearance The drawing repeats slab to slab, so a seam can be aligned and a long run reads as one continuous surface.
Resists Chips and Scratches Engineered quartz shrugs off wine, oil and coffee, and the surface stands up to daily knife-and-pan traffic.

What Is Aetherstorm Quartz?

A soft gray drift over warm white.

Aetherstorm is an engineered quartz in warm off-white, crossed by thin gray veins that travel on the diagonal and blur at the edges instead of cutting a sharp line.

Read it as movement rather than as pattern. The name promises thunder and the slab delivers an overcast calm, which is worth knowing before you order, because this is one of the gentler designs on our Cebu floor.

It runs ₱8,000 per square meter in Cebu, level with Cirrus, Lightning and Nero Calacatta. Restraint is the expensive part: a faint vein has to stay convincing across a whole slab, and that is harder to manufacture than a bold stroke.

Manufactured rather than quarried, the slab works out at roughly 93% crushed natural stone bound with about 7% resin. That build is what makes it stain-resistant, and it is why sealing never enters the routine in a Cebu kitchen.

How Much Does an Aetherstorm Countertop Cost in Cebu?

Prices are subject to change without prior notice.

Item Starting Rates
Aetherstorm slab ₱8,000 per sqm
Fabrication ₱500 per lm
Installation ₱500 per lm
Sink or hob cut-outs ₱500 per set

Cut-out charges apply only when installation is included. Delivery is priced by distance from our Cebu yard, whether the finished tops stay inside Metro Cebu or travel on to Bohol and Tagbilaran.

Get a FREE Quote Today!

How Do You Clean Aetherstorm Quartz?

Three habits keep a pale counter clear.

1

Clean as You Go

Cooking oil, coffee and turmeric rest on top of the slab rather than soaking into it, so a soft cloth deals with nearly every spill. A pale ground shows residue that a darker one would swallow, which is why the wipe-as-you-cook habit pays off in a Cebu kitchen.

2

Use Only Quartz Cleaner

Months of dish soap leave a film that takes the edge off the polish. A pH-balanced quartz formula clears residue instead, without working against the resin that holds the slab together.

3

Never Scour It

Scouring pads, steel wool and abrasive powders leave scuffing in the polish that no amount of buffing brings back. Lift anything baked on with a plastic scraper and the surface stays unmarked.

Our Cebu yard keeps specially-formulated stone care products on the shelf, so nobody has to gamble on a supermarket bottle.

How Do You Care for Aetherstorm Quartz?

Sealing is off the list, which leaves three rules.

1

Always Use Trivets

Heat is the weak point of every quartz slab, because the resin binding it scorches: a pan carried straight off the burner can discolor the surface for good. It is the most common way a quartz counter is ruined and no workmanship warranty covers heat damage.

2

Keep It Out of Direct Sun

Engineered quartz yellows under sustained UV and nothing reverses it. Hang blinds where a counter catches the afternoon, and keep every quartz installation indoors.

3

Skip Harsh Chemicals

Bleach, oven cleaner and other high-pH products wear the resin down over the years. Wax is worth leaving alone as well, since it accumulates and yellows against a pale ground.

Is Aetherstorm Quartz Good for Kitchen Countertops?

A pale counter that resists staining.

Yes. Acid will not etch engineered quartz and the surface resists staining, so calamansi, vinegar, wine and tomato sauce lift off with a cloth rather than settling in. That counts for more on a pale slab, where a mark has nowhere to hide.

Hardness is the other half of the argument. Quartz measures about 7 on the Mohs scale where marble manages 3, so it shrugs off the fine scratching that leaves a soft quarried stone looking tired after a few years of ordinary cooking.

The veining does quiet work day to day. It is far too fine to disguise crumbs the way a busy design would, though it does break up water marks and stops a long run reading as flat.

Plan the seams early. A loud pattern hides a join because the eye is already moving, while fine veining on a near-plain ground gives it nowhere to disappear, so settle placement with the fabricator before templating rather than after.

The real boundary is heat. Set a pan on the slab straight off a live burner and the resin scorches, and no polishing brings that back. Trivets are not optional on any quartz.

Does Aetherstorm Quartz Need Sealing?

There is nothing to seal — this slab is manufactured, not quarried.

No. A sealer earns its keep on quarried stone, filling the pore structure so liquid cannot travel inward. Engineered quartz gains nothing from that, and a few formulations actively work against the resin.

Set it beside the natural stones in the same visual register and the gap is obvious. A white marble wants resealing whenever the water test says so, etches where calamansi lands and marks where a wine glass has stood, and it reaches Cebu on indent order rather than off the floor. Aetherstorm asks for none of that.

Anyone selling you a sealer for a quartz counter has either misread the material or is selling something that will sit unopened under the sink. Cleaning is the entire maintenance routine.

Aetherstorm vs Our Other White Quartz

Four designs at one price in Cebu, so the only question is how loud the veining should be.

Aetherstorm has the softest veining

A fine gray drift across warm white at ₱8,000 per sqm. Take it when you want movement that registers on the second look rather than the first.

Cirrus Calacatta is plainer again

Cirrus Calacatta comes closer still to a plain white slab, with only the faintest movement in it, for the same ₱8,000. Pick it if even soft veining feels like too much for the room.

Lightning Calacatta is the balanced one

Lightning Calacatta draws its veining clearly at the same rate. It is the call when the counter has to be legible from the far side of a Mandaue condo kitchen.

Nero Calacatta is the boldest

Nero Calacatta throws charcoal veins across white for the strongest contrast in the family, again at ₱8,000. Same money, an entirely different level of drama.

What Colors Go With Aetherstorm Quartz?

Neutral veining leaves the rest of the room open.

Gray veining over warm white is one of the easiest surfaces to build a kitchen around, because it never commits fully to warm or to cool.

White and pale gray cabinetry give the tidiest result. The counter reads as an extension of the joinery instead of a feature, which suits a room where something else is meant to catch the eye.

Timber works as long as it stays light. Oak and ash pick up the warmth already sitting in the ground, while walnut and the darker woods tend to leave the slab looking washed out rather than soft.

Hardware is straightforward. Brushed nickel, chrome and matte black all settle in comfortably, and brass is the only one to think twice about, since it pulls the warm undertone forward and shifts the whole surface warmer than it looked at our Cebu yard.

Frequently Asked Questions

Is Aetherstorm real stone?
No, not the way a quarried slab is. This is engineered quartz: roughly 93% crushed natural stone bound with about 7% resin. Quartz itself is a natural mineral, but the slab is made in a factory instead of being cut from a hillside, which is why acid will not etch it and why sealing never comes up.

Is Aetherstorm as dramatic as the name suggests?
No. The veining is fine, gray and diffuse over a warm white ground, and the result is soft rather than stormy. It is one of the quieter designs we carry, so book a look at a full slab at our Cebu yard if you were picturing something bolder.

Can you put a hot pan on Aetherstorm quartz?
No. Direct heat scorches the resin binding the slab and that mark cannot be polished out. Use a trivet for anything coming off a burner or out of an oven, and remember that no workmanship warranty covers heat damage.

Does Aetherstorm quartz stain?
Stain-resistant, not stainproof. Spills rest on the surface instead of soaking in. Wiping them reasonably promptly is still worth doing, though on a pale slab that is about appearance rather than protection.

Does the veining repeat between slabs?
Yes. Because the slab is manufactured, the drawing stays consistent piece to piece, so a seam can be aligned and a long run reads as one surface. Ask to see the actual slabs allocated to your job before fabrication starts.

What thickness and finish does Aetherstorm come in?
Slabs arrive 18 mm and polished, with natural unpolished edges. Whatever edge profile you want on the finished counter is shaped during fabrication rather than something the slab turns up with.

Can Aetherstorm quartz be used outdoors?
No. Sustained UV yellows engineered quartz permanently, so it belongs indoors. For a lanai or an outdoor counter, granite is the material that holds its color under strong sun.

Where can you buy Aetherstorm quartz in Cebu?
Stone Depot carries Aetherstorm quartz at our Cebu yard, and we supply and install across Cebu, Bohol, Leyte and Negros Island. Slabs move between locations, so availability shifts. Finished tops go out across Metro Cebu and Mandaue, or travel to Bohol and Tagbilaran, priced by distance from the yard.

Soft veining is worth seeing at full size, because a sample tile rarely carries enough of the drift to show how a whole counter will read. The branch is open Monday to Saturday, 8 AM to 5 PM, and you are welcome to visit or get in touch.

Send Your Plan and Get an Estimate Within 24 Hours

Free and no obligation. Or drop by any of our branches and we will provide you a quotation on the spot.

Get a FREE Quote Today!
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Aetherstorm”

Your email address will not be published. Required fields are marked *

Scroll to Top